Our Products
Features
HDF laminate flooring by Surya Click, the 4th largest manufacturer of HDF laminate flooring in the world, brings along a spectrum of unparalleled features that guarantee the flooring's durability, quality, and superiority. Above all, these characteristics empower flooring to bring elegance to your space, thereby perfectly matching your vision and requirement. Here are some of the unique characteristics of our products;
Fast & Easy
Fast and easy single action installation
Stability
Strong, resilient and dimensional stability
Lower risk of squeaking sound
No shifting of short or long sides
High Impact Resistance
High resistance to impact or abrasion from furniture legs, chair castors
Heat & Flame Resistance
Resistance to heat and flame
Skid-free & Slip Resistant
Skid-free and slip resistant
Fast and easy single action installation
Stability
Strong, resilient and dimensional stability
Lower risk of squeaking sound
No shifting of short or long sides
High Impact Resistance
High resistance to impact or abrasion from furniture legs, chair castors
Heat & Flame Resistance
Resistance to heat and flame
Skid-free & Slip Resistant
Skid-free and slip resistant
KNOW YOUR FLOORING
RANGE

PLANK SIZE
1200mm x 191mm
1200mm x 220mm

THICKNESS
8mm / 12mm

GRADES
AC3 / AC4 / AC5
variants
General Requirements | |
---|---|
Thickness of the element | Average +/-0.5 mm relative to the nominal value Maximal, minimal >= 0.5 mm |
Length of top layer | No measured value because following values exceed nominal value: Length < 1500 mm: >= ± 0.5 mm Length > 1500 mm: >= ± 0.3 mm/m |
Width of top layer | Average >= 0.1 mm relative to the nominal value Maximal, minimal >= 0.2 mm |
Length of side in case of square elements | Average >= 0.1 mm relative to the nominal value Maximal, minimal >= 0.2 mm |
Right-angle gauge test | Maximal >= 0,2 mm |
Straightness of edge (longitudinal distortion) | Maximal >= 0,3 mm/m |
Flatness of the element | Maximal individual values: Width concave >= 0.15 %, convex >= 0.20% Length concave >= 0.50 %, convex >= 1.00 % |
Joint openings between adjacent elements | Average >= 0.15 mm Maximal >= 0.20 mm |
Difference in elevation between adjacent elements | Average >= 0.10 mm Maximal >= 0,15 mm |
Dimensional distortion with climatic changes | Length and width >= 0.9 mm |
Lifting resistance | > 1,00 N/mm² |
Lightfastness, EN 20105 | Blue Wool Scale, Part B02, no worse than 6 Grey Scale, Part A02, no worse than 4 |
Indentation after constant load, EN 433 | No visible change >= 0.01 mm in test with straight steel cylinder, diameter 11.30 mm |
Surface appearance, EN 438 | Minor surface defects are permissible |
Moisture content on leaving works, EN 322 | 4 to 10 % Deviations within any one delivery >= 1.5% |
Comparision of
European Standards
VS.
Surya Click Wooden Flooring
European Standards of Wooden Flooring | Test | ||||
---|---|---|---|---|---|
Service Category | Domestic | Commercial | EN 685 | ||
Heavy | Light | Normal | Heavy | ||
Resistance to abrasion | AC 3 IP > 2.000 |
AC 4 IP > 4.000 |
AC 5 IP > 6.000 |
Appendix E | |
Impact Resistance Newton/mm drop height | IC 1 | IC 2 | IC 3 | Appendix F EN 438 2.11/2.12 |
|
10N/800mm | 15N/1000mm | 20N/1200mm | |||
8N/1000mm | 12N/1400mm | 15N/1600mm | |||
Resistance to Stains Groups 1, 2 & 3 | Grade 5 Grade 4 |
EN 438 2.15 | |||
Resistance to cigarette Burns | Grade 4 | EN 438 2.18 | |||
Effect of a furniture leg | No visible damage when tested with test object Type O | EN 424 | |||
Effect of a castor chair | No visible change or damage | EN 425 | |||
Thickness Swelling | <20% | <18% | Appendix G |
SURYA CLICK WOODEN FLOORING | Test | |||
---|---|---|---|---|
Domestic | Commercial | EN 685 | ||
Heavy | Light | Normal | Heavy | |
AC 3 > 3800 |
AC 4 > 5500 |
AC 5 > 6500 |
Appendix E | |
IC 1 | IC 2 | IC 3 | Appendix F EN 438 2.11/2.12 |
|
8N/800mm | 18N/1000mm | 25N/1200mm | ||
6N/1000mm | 10N/1400mm | 16N/1600mm | ||
Grade 5 Grade 4 |
EN 438 2.15 | |||
Grade 4 | EN 438 2.18 | |||
No visible damage when tested with test object Type O | EN 424 | |||
No visible change or damage | EN 425 | |||
< 12% | < 16% | Appendix G |